Beaker Lids
USA Scientific Inc ThinCert 0.4 micron transl
ThinCert 0.4 um translucent insert for 6-well plates, individually wrapped, 24/pack. Includes 4 plates with lids.
Chemglass Life Sciences 7-Neck PTFE Reaction Vessel Lid, 80mm, 24/40 Outer, 118mm Overall Height
7-Neck PTFE Reaction Vessel Lid, 80mm, 24/40 Outer, 118mm Overall Height. Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: center neck 1/2 female NPT for PTFE standard taper adapter, side necks 3/4 female NPT, vertical for PTFE standard taper adapters, side neck 3/4 female NPT with 10 X 10 compound angle for PTFE compression fitting used with Lasentec Probe, and side necks 1/4 female NPT. Lid is supplied complete with listed PTFE standard taper adapters for center and vertical side necks, 14mm PTFE compression fitting for 10 X 10 compound angle side neck, and three 1/4 male NPT PTFE plugs. For PTFE coated clamp see CG-141-T-10. For FEP-Encased Stainless Steel o-ring see CG-147-79. PLEASE NOTE: DUE TO SPACE CONSTRAINTS ON THE LID, WE RECOMMEND USING THE CG-2077 OR CG-2077-H 10MM PTFE BEARING WITH THE LOOSENING NUT REMOVED.Lasentec is a registered trademark of Mettler Toledo
Andwin Scientific POLYETHYLENE LIDS
Snap Cap Lid Only Cs500 Bulk Non-Sterile. Case Of 500. For Use With 89107-308 Or 89107-310., 1/CS
Electron Microscopy Sciences Tri-Pour Beaker Cap for 250 ml beaker
The caps are available for all Tri-Pour beakers. The caps are wax impregnated, have lift-tabs, and may be written on for sample identification.
Use: 250 ml
Electron Microscopy Sciences Round Box with Friction-Fitted Lids
Super for storing many items that just don't seem to fit in square or rectangular boxes. Supplied with friction-fitting lid. Especially designed for storing little pieces that constantly are misplaced. Ideal for specimen blocks, apertures etc. Molded from polystyrene for optimum clarity and rigidity. Polystyrene with friction-fitting lids.
Electron Microscopy Sciences PTFE Beaker Cap, 5 ml
Is statically molded from virgin "PTFE" and machine finished to give a smooth surface for ease of cleaning and to eliminate contamination. Supplied with a pouring spout and they are virtually immune to chemical attack. Working temperature range is from cryogenic to 260 degree C (500 degree F). Ideal for use in wafer etching.
Capacity: 5 ml
Electron Microscopy Sciences PTFE Beaker Cap, 1 ml
Is statically molded from virgin "PTFE" and machine finished to give a smooth surface for ease of cleaning and to eliminate contamination. Supplied with a pouring spout and they are virtually immune to chemical attack. Working temperature range is from cryogenic to 260 degree C (500 degree F). Ideal for use in wafer etching.
Capacity: 1 ml
Electron Microscopy Sciences Tri-Pour Beaker Cap for 400 ml beaker
The caps are available for all Tri-Pour beakers. The caps are wax impregnated, have lift-tabs, and may be written on for sample identification.
Use: 400 ml
Cole-Parmer Digi-Sense Thermocouple Probe Wire, Type T, 24-Gauge, Polyvinyl Insulation, RiPCord, 1000ft
Wire comes in 24-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.